Follow us on

PRODUCTS

Prevention of vapour lock phenomenon

It has a high boiling point and low moisture absorbency, which suppress the occurrence of vapour lock phenomenon due to moisture contamination and sustain high boiling point for a long term.

Excellent fluidity

The brake system always operates smoothly with excellent fluidity under severe climatic condition and with great cold resistance and heat resistance.

Outstanding rust and corrosion proof performance

It controls the corrosion of the metal parts, prevents the deterioration of the rubber parts and the oxidation of the fluid for keeping the safe operation of the brake system.
APPLICATION
  • It can be used in a wide range of brake and clutch application in passenger cars, light and heavy commercial vehicles, tractors, motorcycles where DOT 3 type of fluids are specified by the vehicle manufacturers.
  • It needs to be changed regularly as it absorbs the moisture that causes rust and corrosion in brake system. If the moisture dispersed throughout the system, the brake fluid boiling point will get lower, increases its viscosity.
RECOMMENDATION OF CHANGE INTERVAL Within 2 years or 25,000 – 30,000 KM.
CAUTION
  • Do not mix with other fluids such as silicone-based or mineral-based fluids.
  • This fluid may spoil paintwork. If spilt, wash off immediately with water. Store brake fluid only in its original container which should be kept clean and tightly closed to prevent absorption of moisture. Contamination with dirt, water, petroleum products or other materials may result in brake fluid failure or costly repairs.

Reviews

There are no reviews yet.

Be the first to review “HYPERLUBE BRAKE FLUID DOT 3”

Your email address will not be published. Required fields are marked *

Related products